I have a 91 extened cab pickup. My turn signals stopped working. The
hazzard flashers work and the lights blink, as well as the brake light
and parking lights.

When I push down or up....nothing. All lights are on and it doesn't
appear to be a burnt out bulb.

Any suggestions? The Haynes mannual doesn't really offer anything.
Thanks for your help.

John

You said that all the lights are on. Do you mean the turn signal bulbs
light up but don't blink? If so it sounds like you may have a bad flasher.

no...they don't come at all when I use the turn signal....nothing. I
thought it was bad bulbs but they work when I use the Hazzard switch.
Suggestions?

Have you checked for a blown fuse or a bad turn signal flasher yet ?

Nothing happens when I use the turn signal...nothing, no light. The
lights do work when using the hazzard switch.

Suggestions.

When you use the turn signal lever, do the lights not flash or not come
on at all? If they don't flash, change your flasher module which is in
the fuse block under the dash. If they don't come on at all, your
"combination switch" inside your steering wheel is bad.

Thanks to all for their replies....Last night I was starting to work on
on all the the small things before tackling the combination switch. I
started with the fuse panel...and I found a blown fuse. I replaced it
with a 10 Amp fuse and the signal lights worked.

Looks like I'll be returning the flasher and 8 bulbs. Thanks again for
your help.

John

Keep the bulbs, and put them where you can find them - with a 15
year old car you'll need them. And when one goes, change them all as
a batch because they all have the same hours on them.

I have a medium size tackle box in the garage with only auto bulbs -
it's cheaper to buy a 10-lamp carton than four lamps in the retail
blister packs. They don't go bad, and they get used.'
--<< Bruce >>--

--
Bruce L. Bergman, Woodland Hills (Los Angeles) CA - Desktop
Electrician for Westend Electric - CA726700
5737 Kanan Rd. #359, Agoura CA 91301 (818) 889-9545
Spamtrapped address: Remove the python and the invalid, and use a net.