Mombu the Aviation Forum sponsored links

Go Back   Mombu the Aviation Forum > Aviation > Solartex or 21st Century fabric?????
User Name
Password
REGISTER NOW! Mark Forums Read

sponsored links


Reply
 
1 9th October 23:46
#$%^ham2405
External User
 
Posts: 1
Default Solartex or 21st Century fabric?????


I'm ready to cover my 1/4 Super Cub and want to use fabric.

Another club member recently finished a 1/3 plane with Solartex, and
said it was very easy to work with. It also costs less then 21st
fabric. However, matching paint is not offered (that I could find),
and I need it for the cowl, struts, and cabin trimming.

Coverite does offer matching paints for their 21st Century fabric,
which solves the painting problem. However, I do not know anyone in
my club who has used 21st fabrics so don't know about the workability.

I've also heard that Coverite and Monokote spray paints aren't all
that great.

Ssssoooooo, what to do ????? OR, does anyone in the group have actual
experience using Ceconite lite with Poly Fiber finishes????

David
  Reply With Quote


  sponsored links


2 9th October 23:47
dr1driver
External User
 
Posts: 1
Default Solartex or 21st Century fabric?????


I've used 21st Century Fabric once, and I won't again. It's heavy, doesn't
shrink well, and is hard to handle, IMO. The glue is a "soft" adhesive. If
you iron a seam and then hit it with a gun, it will relax and let go. It
actually takes 3 different heats to properly apply it.

I've also used Coverite's paint. You have to spray it in many very light
coats, and it takes a while to dry really hard.

I've used *tex many times and love it. It shrinks great, and stays glued down.
It's light, too. With lighter colors, you can see through it if held in the
sunlight.

For matching paint, I'd take a scrap to Lowe's or Home Depot, have them
computer-match it, and brush it on.


Dr.1 Driver
"There's a Hun in the sun!"
  Reply With Quote
3 9th October 23:47
mjc
External User
 
Posts: 1
Default Solartex or 21st Century fabric?????


I used the S**** system just to try it out for the first time on a 1/4
scale Citabria. I was at first a little intimidated by the way it works
(like everybody, I was used to the plain and simple iron on coverings). But
once I did the tail fins (and what a mess that was), I figured it out and
the rest went great. In fact, it turned out to be quite a load of fun, and I
really really liked the results. For paint, I then used a single coat of
epoxy primer and automotive urethane, and yes, it looked GREAT!
Having gotten the first S**** project behind me, I'll never cover a
giant any other way. Try it, it's worth the (very short) learning curve, and
be sure to buy the manual, read it, and FOLLOW DIRECTIONS!!!
http://www.s****.com

MJC
  Reply With Quote
4 9th October 23:47
john morley
External User
 
Posts: 1
Default Solartex or 21st Century fabric?????


Hi,

My recommendation would be to use Sig Koverall fabric and nitrate dope
and paint everything! If you're going to go with a gas engine, you can
even use latex house paint mixed to match the exact color you want with
a polyurethane clear coat to protect the paint. I found that 21st
Century Coverite has a very weak adhesive and did not stick well to the
structure of the model, or to itself! Koverall is really robust and
permanent!

Good Luck!

John
  Reply With Quote
5 9th October 23:47
mike
External User
 
Posts: 1
Default Solartex or 21st Century fabric?????


Solartex covers great. Very easy to use.
However in my experience, it stains easily. It needs to be sealed with
your favorite clear coat.

21st Century Fabric is indeed picky about temperatures during application,
but is impervious to staining, for the most part anyway.

Depending on how many sealer coats are applied, I would venture to say in
the end the two come out about even, weight wise.

Mike
  Reply With Quote
6 10th October 22:25
fred mcclellan
External User
 
Posts: 1
Default Solartex or 21st Century fabric?????


Coverite Super has better adhesive, is more docile, and just plain
works better than the 21st Century variety.

It's also less expensive.

21st Century is 27" x 15' @ $39.99
Coverite Super is 45" x 15' @ $39.99

I use Coverite Super on open bay structures and .58 glass on sheeted
structures. I coat both with epoxy thinned 50% with denatured
alcohol. Seals in one coat, stabilizes the fabric yet leaves a
visible weave, and takes any sort of paint you like. A second coat of
thinned epoxy hides the weave leaving a near-glass smooth paint-ready
surface.

Latex enamel can be had in any color under the sun, and you can spray
the stuff without much effort. A fuel-proof clear coat and you're
done.

FWIW.
Cheers,
Fred McClellan
The House Of Balsa Dust
http://home.mindspring.com/~the-plumber
  Reply With Quote
7 10th October 22:27
bruce bretschneider
External User
 
Posts: 1
Default Solartex or 21st Century fabric?????


Has anyone tried the LiteFAB available from Jerry Nelson? It is an
extra-fine weave polyester fabric with a weight of 2.9 ounces/square yard.

Bruce Bretschneider
  Reply With Quote
8 10th October 22:27
eric
External User
 
Posts: 1
Default Solartex or 21st Century fabric?????


Personally, for the toughest, longest lasting covering for the least amount
of work you cant beat the "Tex" fabrics. Could probably cover a bowling
ball wrinkle free with the stuff, and one coat of clear to seal it if you
want easier cleanup is all it needs.

--------

Eric Kler
FUBAR Hill - http://www.fubarhill.com

--
  Reply With Quote
9 11th October 19:26
ted campanelli
External User
 
Posts: 1
Default Solartex or 21st Century fabric?????


On 1/15/2004 3:31 PM Ted shuffled out of his cave and grunted these
great (and sometimes not so great) words of knowledge:

Definitely avoid 21st Century Fabric. It is quite heavy compared to
Solartex and if you want it to stick (and stay stuck) you will need to
coat the airframe in either Balsa Rite for Fabric (it is different than
the one for film) or Sig's Stix-It.

I highly recommend Solartex. It is very easy to work with, a short
learning curve (as with any covering you have not used before) and does
not require anything on the airframe before applying.

Solartex does have one downside - you will need to clear coat the fabric
to prevent staining.

For paint, I bring a sample to the local paint store and have them match
it up in a latex. Then you can brush (best results are with a foam
brush) or spray it on. I also suggest using "FloTrol" with the latex to
allow better leveling. After you are done, let the paint "cure" for
several days, preferably in the sun and then clear coat. There are
several you can use - LusterKote, Ultracote clear or polyurethane. If
you are going to use poly, I would suggest 2 or 3 SPRAYED coats of
MinWax PolyCrylic or 1 - 2 coats brushed on. Again, use FloTrol to
assist leveling, especially if brushing. The Polycrylic is resistant up
to 10% nitro definitely - many report excellent resistance with 15% nitro.

Hope this helps.
  Reply With Quote
10 12th October 16:04
tommy
External User
 
Posts: 1
Default Solartex or 21st Century fabric?????


I used it on my Nosen Citabria. Goes on easy and tightens well. I have used
s**** and the Litefab is as good but easier to apply.
I used the s**** pinking tape and "the pink stuff" to stick the pinking tape
down
Regards

Tom Watson
Sydney Australia
  Reply With Quote
Reply


Thread Tools
Display Modes




Copyright 2006 SmartyDevil.com - Dies Mies Jeschet Boenedoesef Douvema Enitemaus -
666