anthony b

I own a 2004 Chevy Express Cargo Van and don't know how to replace a burned
out front directional signal bulb. The bulb cannot be accessed from
underneath the hood, and there are no screws on the exterior lens cover that
surrounds the bulb. I believe that the exterior cover has to be pried off
in order to get at the bulb, but I don't know how this cover is removed. Is
there a special tool that will pry the cover off?

Any help will be appreciated.

Anthony B

whitelightning

The entire trim assembly is removed, then the bulb is accessed from the rear
of the housing. DO NOT pry the lens off unless you want to buy a new trim
assembly.

Whitelightning

whitelightning

The entire trim assembly is removed, then the bulb is accessed from the rear
of the housing. DO NOT pry the lens off unless you want to buy a new trim
assembly.

Whitelightning

petty

Just got worked it out last week. There were 2 screws that has to remove and there is also a screw not attached to any bolt going out the back of the light and into the framework.Well, try taking off the panel either the left or the right one.

_____________________
Autopartswarehouse.com Car Mods.