Hi

I want to fit a parking sensor to my 2001 C5.

I need to take off the front nose cone and the rear panel.

I assume it must be fairly easy but can anyone advise points to look out
for, or any pictures on the net that shows how?.

Thanks

If your email address is correct I'll send you a pdf file on the front and
the rear.

--
Dad
05 C6 Silver/Red 6spd Z51
72 Shark Black/Black/4spd

Yes please, this info is not so easy o get in the uk

Thanks for that.

Any idea how long it tskes to get the panels off?.

For what you want to do I'd never take them off. On the front you can take
the lower panels and the spoiler off and get to the inside front with room
to work. On the back take out the license plate bracket and the backup
lights. If that's not enough you can remove the inter fender on the back to
get more access.

When I removed the front on my '98 it took about 2 1/2 hours but I had some
deer tangled up in the works to clear out.

--
Dad
05 C6 Silver/Red 6spd Z51
72 Shark Black/Black/4spd