2000 CTD Belt Tensioner

I have an annoying squeal on my 2000ctd (156K). Does it pretty much
all the time, under load/idle, cold/hot, etc. I'm suspecting belt
tensioner based on experiences with other vehicles. Sound like a good
bet? Haven't pulled the fsm yet to look, is it a pretty straight-
forward swap out? Can I reach it without taking the front-end apart?
I have a replacement belt on board ready to go, so I'll swap that at
the same time.

Thanks in advance,

Jack

EASY, Take off the belt, unbolt the tensioner and put on the new one.
Reinstall the belt. Been there, done that.

Joe(2000 3500 CTD)

Thanks, Joe. I got the tensioner today from NAPA. Will give it a go
this weekend.

Jack

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode test 33Switch to Hybrid Mode Switch to Threaded Mode

2 15th June 12:08 joseph myers External User Posts: 1	2000 CTD Belt Tensioner EASY, Take off the belt, unbolt the tensioner and put on the new one. Reinstall the belt. Been there, done that. Joe(2000 3500 CTD)

3 15th June 12:08 jackvt80 External User Posts: 1	2000 CTD Belt Tensioner Thanks, Joe. I got the tensioner today from NAPA. Will give it a go this weekend. Jack