26th May 14:04
2000 dodge 1500 4x4 wont start
I have a 2000 dodge ram 1500 4x4 that has ran fine for the last year,
it has 160k. the truck stalled on me last week and i could not get it
to start, i finally found what i thought was the problem, bad coil
wire, replaced it and the truck started and ran fine, i took it for a
test drive and a block down the road it stalled and i havent been able
to get it started since, it has spark, and plenty of fuel pressure, i
checked all cyclinders for compression, 120psi in each.
checked all fuses and relays, all are fine. changed spark plugs,
checked TPS , no codes are showing.
Was wondering if anyone has had any of these symptoms.
My next step tommorow is to check and/or replace the crankshaft
position sensor, i heard this will cause the truck not to start.
Was also wondering about the camshaft position sensor, but i have read
that that is only for diag. purposes only, anyone know if that is the
any help would be greatly appreciated.