I am in the midst of replacing the timing belt and water pump. While I
have good access to the AC compressor and clutch, I wanted to replace
the AC clutch because the outer ring is just hanging there loose. Not
sure why it separated from the clutch but it rattled horribly under
load at highway speeds.

Anyway, what tools would I use to remove the AC cluch? I think a
spanner wrench, but what else? Do I really have to energize the coil
to remove it? A new clutch is cheap enough to replace.

Thanks

No takers? Looking for a spanner wrench, no luck so far.

Thanks

No takers? Looking for a spanner wrench, no luck so far.

Thanks

aarcuda69062

In article
<1140624540.453235.203640@f14g2000cwb.googlegroups .com>,


http://buy1.snapon.com/catalog/item.asp?search=true&item_ID=12068&
PartNo=A176&group_id=3660&store=snapon-store&tool=all

You'll also need a puller and installing tool to R & R the clutch
and an assortment of shims to set the clutch gap.

Thanks for the tip. I found a Ford T81P-19623-MH spanner wrench on
ebay for $13, includes shipping. Alldatadiy specifies this part number
and it looks like a mate to the hole patterns on the end of the clutch.

Can I just replace the seperated end-plate on the clutch? That is the
only reason I'm messing with it anyway. I'm pretty sure the rest of it
works, it always did until the end plate got loose.

Thanks

shoesaleman

yes but will most likely have to buy the whole thing. does it have a
bolt on the end of the shaft? if so I dont think you need anything
special. if its a nut on the end you need a puller and installer iirc.

neil ya forgot the boomstick

hows the wife
did she kick the crack habit yet?
h
u
r
c

aarcuda69062

Nope. I left it stuck in your ass on purpose.


She's just fine.


Don't know, are your nuts sore?

you like playing with asses?

no but it hurts when i pee

h
u
r
c

aarcuda69062

That's just your brain reacting to having to do more than one
thing at a time.