94 ford ranger rear body panels

Hello--

I am new to this newsgroup and was wondering if I can ask a couple quick
questions about my 1994 Ford Ranger XLT 3.0L V6 truck. First off, I was in
an accident in January and dented every panel on the truck. I am replacing
one of the fenders which was the main area of damage. Now, I am interested
in replacing the other panels. My only problem is that I have been looking
online for replacement parts, but have found nothing. Do they even sell
rear body panels for ford rangers? And, secondly, is there any information
to better inform me about body replacement online? I have been looking for
the past month, and still absolutely nothing. If you do have any
information that could help, please reply back as soon as possible.

--Brian

You are looking for the rear quarter panels or fleetsides. Most aftermarket
companies don't bother with those large panels.
Probably have to buy them from a dealer or wrecking yard.
They aren't the easiest parts to change either.

What about replacing the whole bed of the truck? I have heard that
replacing the whole bed isn't too hard of a job. Basically, I am just
looking for a way to get rid of as many dents as possible, and considering
that the bed was dented all over that maybe replacing the whole thing maybe
the easiest way.

If the entire bed is dented, I would suggest going to a junk yard and look
for a entire bed. Usually the bold in the floor of the bed and wiring are
about all you will need to undo. Did this to a 66 F-150. Was better than I
probably could have done taking it to a body shop. And cheaper I am sure...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode test 33Switch to Hybrid Mode Switch to Threaded Mode

2 25th January 20:41 scott External User Posts: 1	94 ford ranger rear body panels You are looking for the rear quarter panels or fleetsides. Most aftermarket companies don't bother with those large panels. Probably have to buy them from a dealer or wrecking yard. They aren't the easiest parts to change either.

3 26th January 00:33 brian External User Posts: 1	94 ford ranger rear body panels What about replacing the whole bed of the truck? I have heard that replacing the whole bed isn't too hard of a job. Basically, I am just looking for a way to get rid of as many dents as possible, and considering that the bed was dented all over that maybe replacing the whole thing maybe the easiest way.

4 26th January 00:34 david coleman External User Posts: 1	94 ford ranger rear body panels If the entire bed is dented, I would suggest going to a junk yard and look for a entire bed. Usually the bold in the floor of the bed and wiring are about all you will need to undo. Did this to a 66 F-150. Was better than I probably could have done taking it to a body shop. And cheaper I am sure...