Mombu the Gardening Forum sponsored links

Go Back   Mombu the Gardening Forum > Gardening > Help! -- Harbor Freight drip irrigation kit (hose)
User Name
Password
REGISTER NOW! Mark Forums Read

sponsored links


Reply
 
1 24th March 05:23
veeduber
External User
 
Posts: 1
Default Help! -- Harbor Freight drip irrigation kit (hose)


The only fitting in the kit that matches the threads of a standard hose bib
appears to be some sort of anti-syphon valve. Screw things together, apply
pressure and the adapter (?) leaks like crazy.

What am I doing wrong?

HF is no help... 'Send it back.' Good advice but it's here and the emitters
work and tubing is tubing and the plants don't care, so long as they get a
drink now & then.

Any help would be warmly appreciated.

-R.S.Hoover
-Vista, California
  Reply With Quote


  sponsored links


2 24th March 05:23
cereus-validus
External User
 
Posts: 1
Default Help! -- Harbor Freight drip irrigation kit


What you are doing wrong is that you are whining about it in a gardening
newsgroup.

Are you expecting Al the handyman to write you back via this group?

Go to Home Depot and tell them your sob story or, better yet, contact the
manufacturer about your predicament. We can't fix it from here.
  Reply With Quote
3 24th March 05:24
michael lyons
External User
 
Posts: 1
Default Help! -- Harbor Freight drip irrigation kit (have water hose)


I assume you have checked to make sure there is a washer on the hose bib end
of the thing. Shaking it and or shocking it with sudden changes in water
pressuse may knock an internal part into place. Failing that, I would check
my local hardware store. Around here Lowes and Home Depot sell parts for
drip irrigation. Even one of Walmarts around here stocks a few parts.
Tearing it out and sending it back sound like more trouble than it is worth.
I must have about 40 drip units running in 2 lines off of a sprinkler system
timer and valves, and I love it. The only problem I have is the squirrells
who will chew throug tubing from time to time.
  Reply With Quote
4 24th March 05:24
vox humana
External User
 
Posts: 1
Default Help! -- Harbor Freight drip irrigation kit


You can get about any drip irrigation product you might need here:
http://www.dripirrigation.com/

I don't recall seeing a drip irrigation kit at Harbor Freight, but most of
their stuff is so cheap that you might be better off getting a complete new
kit just for the adaptor. Of course a person of low morals might get a new
kit, swap out the defective part, and return the thing to the store, noting
that the part was defective. Mind you, I don't think you should even
consider doing this.
  Reply With Quote
5 24th March 05:24
father haskell
External User
 
Posts: 1
Default Help! -- Harbor Freight drip irrigation kit


Buy a new checkvalve, plumbing section, HD, less than $10.00.
  Reply With Quote
6 24th March 05:24
jmagerl
External User
 
Posts: 1
Default Help! -- Harbor Freight drip irrigation kit


I opted for the dripworks starter kit ($32.00).
http://www.dripworks.com/store/store.html?heartkit.html&mainFrame

I saw the HF kit and at $6.49 I took a pass. Didn't inclusde a filter to
keep the emitters from getting plugged. Neoprene tubing is not the most
durable. Here's link to it:
http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=46095.
Although $6 is hard to pass up .
  Reply With Quote
7 24th March 05:26
chipmkrremove
External User
 
Posts: 1
Default Help! -- Harbor Freight drip irrigation kit (have hose)


I bet the other threads that are leaking are NPT threads. Its commn
and other manufacturers have adapaters, such as anti syphon and hole
adapter, filte etc to be hose threads and or pipe threads. All the
washers and thread sealant tape in the world is not gonna make a hose
thread adapt to a pipe thread.....then again you say its a Horrible
Fright kit, so with that in mind most any kind of thread is possible
from that company. As cheap as drip irrigation systems are, why did
you choose HF for a source when prices are reasonable and cheap at
major home building supply stores and online. There are perhaps 6 or
8 companies and if you do your homework, and read their online manuals
as to what fittings are and how they are sized, its a simple matter to
assemble drip irrigation and have it work..........all without leaks.
Visit my website: http://www.frugalmachinist.com
Opinions expressed are those of my wife,
I had no input whatsoever.
Remove "nospam" from email addy.
  Reply With Quote
Reply


Thread Tools
Display Modes




Copyright 2006 SmartyDevil.com - Dies Mies Jeschet Boenedoesef Douvema Enitemaus -
666