Cbjhawks 2012-03-01 14:09:40
I recently installed SuSE 9 as a third OS (along w/RH9 and
XP)…everthing works great ‘except’ the internet…to do
this I had to add a PCI adapter card that would allow me to expand my
IDE channels (from 4 channels to 8)…during POST I noticed that the PCI
card is listed as a Mass Storage Device occupying IRQ 5, which is the
same IRQ that my onboard MB LAN is assigned. I have been trying static
IP address that XP and RH9 uses (along w/subnet mask and gateway) and I
have tried DHCP..still no connection to the www. I have ran ifconfig up
and down…I’ve tried to ping various address’…no luck.
IDE 0 = Master XP
IDE 0 = Secondary RH9
IDE 1 = Master CDRW
IDE 1 = Secondary CDROM
PCI card = IDE 2 = Master SuSE
IDE 2 = Secondary ’empty’
IDE 3 = both ’empty’
the module tulip is loaded and startup of Suse shows the loopback and
eth0 as being configured “done”…I’m running out of ideas here…what
else do I need (ie…modules/process’)? Is there a IRQ conflict which is
not allowing me to the www?…Thoughts….please!
—–= Posted via Newsfeeds.Com, Uncensored Usenet News =—–
http://www.newsfeeds.com – The #1 Newsgroup Service in the World!
—–== Over 100,000 Newsgroups – 19 Different Servers! =—–