ph12

I have this B-Mac receiver/decoder.

First question: Is it any use as an ****ogue receiver

Second: When any controls are pressed the display shows 'locked.' Can it be
unlocked?

or is it now just an expensive looking paper weight?


Thanks

Peter

If it has a serial port (RS-232) connect a computer, run a terminal
program,setup for 8 bits No parity and 1 stop bit at 9600 bits.

The serial port may not be the standard RS-232 pin out.

type 'SA1LOCK and press RETURN.
the LOCK level should be returned
for more commands
http://www.chesapeake.net/~scambron/download/
and down load " PV9234.PDF " file.
the SA commands have not changed much

' SA1LOCK=0 " should release ALL the locks

scambron