Neil 2012-05-05 02:28:29
I had Sky+ installed a couple of weeks ago, and have just wired up one of
the spare LNB connections to my old receiver in a different room, to receive
FTA channels. But I’m not receiving any signal. I’m checking my
connections, but is there anything else in terms of setup that I have to
remember to do?
Mark 2012-05-05 02:28:42
Try a diff output from the LNB, and check all connections are ok and there
is no damage to the cable. Mark
Neil 2012-05-05 02:29:04
When I ran through every single connection it had to be the last…. I
think it was a poor connection on a wall socket box. seems ok now.
Brendan dj mur 2012-05-05 23:13:19
Shouldn’t you be using a continuous cable from LNB directly to digibox
without any breaks or “wall-boxes”?
Mark 2012-05-07 02:02:26
It dosent matter if you use wall boxes or not Mark