Ph12 2007-03-29 02:26:47
I have this B-Mac receiver/decoder.
First question: Is it any use as an analogue receiver
Second: When any controls are pressed the display shows ‘locked.’ Can it be
or is it now just an expensive looking paper weight?
Mombu 2007-03-29 11:43:18
If it has a serial port (RS-232) connect a computer, run a terminal
program,setup for 8 bits No parity and 1 stop bit at 9600 bits.
The serial port may not be the standard RS-232 pin out.
type ‘SA1LOCK and press RETURN.
the LOCK level should be returned
for more commands
and down load ” PV9234.PDF ” file.
the SA commands have not changed much
‘ SA1LOCK=0 ” should release ALL the locks