24th April 17:54
Windows Protection Error
I started to have some problems with my computer a few
weeks ago. The main issue is with the system locking up
during start up. 50% of the time I receive Windows
protection error CONFIGMG the other 50% locks up during
the screen with the Windows Logo.
I have contacted the manufacture about this problem. They
basically had me repeat steps I had already tried. I also
checked on the Knowledge base here.
What I have tried is fdisk, format and restoring windows.
I have removed all non OE hardware prior to this. I have
used selective start up and found when I removed the check
mark next to System.ini it seems to lessen but not remove
The only bulletin I found directly dealing with Windows
Protection Errors with CONFIGMG mentioned.......
"This behavior can occur because Windows Setup flushes the
L2 Cache as it initializes the PCI-to-AGP Bridge on a
Micro-Star International MSI-5169 motherboard. " The
motherboard in my system is not this motherboard.
Any help on this issue would be greatly appreciated!
Thanks in advance