illo

Hello guys,
i've got a qtek 9090 with wifi.
i would like to surf the net with this palm through the network that i've
got on my desk (i've got a broadband connection)
activesync doesn't allow me to do a synronization through wifi and if i try
to connect the qtek on the net it's not possible to open the pages.
thanks to everyone.

david hettel ms mvp - mobile devices

From the today screen tap | Start Menu | Settings | Connections |
Connections (icon) | Advanced (tab) | Select Networks | Set the bottom
setting to "My Work Network" tap | Edit | Proxy Settings | Check only the
fist item, "This network connects to the Internet" leave everything else
blank. Tap | OK | Set the first item to "My Work Connection" | tap | OK | OK
| X | Important you MUST back all the way out to the today screen for these
settings to take. This completes the settings for the qtek.

I would suggest that you get vxUtil from http://www.cam.com and see if you can ping
your PC by name, you MUST be able to do this to be able to sync. Generally
this is best done by enabling NetBIOS over TCP/IP in the advanced settings
of Internet Protocol (TCP/IP) your network card. After making this change
you should reboot and wait about 5 minutes for the new info to work through
your system.

Without knowing more about your PC it's hard to say exactly what changes
will need to be made their. If you are running a firewall you will need to
allow Activesync through the firewall.


--
David Hettel
Microsoft MVP Mobile Devices

This posting is provided "as is" with no warranties, and confers no rights.
You assume all risks for your use.

Handhelds, mobile: http://www.geekzone.co.nz
Bluetooth guides: http://www.geekzone.co.nz/content.asp?contentid=449