abcdhughes

Hello,

I have a Cat.5e Ethernet crossover coupler, pins 1-3 connected, pins
2-6 connected, however my PC to 4 port switch connection works whether
or not I insert the coupler with an extra straight through cable. I
have verified coupler and cable wiring with a continuity tester. The
situation also applies for my laptop. I am however unable to get a PC
to laptop connection working using two straight throught Cat.5e cables
and the crossover coupler.

Any ideas ?

Thank you

Declan Hughes

steve winograd [mvp]

Many recent network switches automatically sense what type of
connection each port has and can handle both straight and crossed
connections. For example, Netgear calls that capability "Auto
Uplink", as described here:

http://www.netgear.com/Products/Swit...hes/FS608.aspx

The Ethernet adapters on your computers can't do automatic connection
type sensing.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com

abtemp

Hello,

I have a Cat.5e Ethernet crossover coupler, pins 1-3 connected, pins
2-6 connected, however my PC to 4 port switch connection works whether
or not I insert the coupler with an extra straight through cable. I
have verified coupler and cable wiring with a continuity tester. The
situation also applies for my laptop. I am however unable to get a PC
to laptop connection working using two straight throught Cat.5e cables
and the crossover coupler. Do some Ethernet devices such as the switch
have auto pin sensing/selecting ? Why does the PC-laptop connection not
work (it starts to register, however no packets transfer, and then the
connection fails).

Any ideas ?

Thank you

Declan Hughes

fedup

autosensing device, see Google