|
|
|
|
|
1
1st November 02:55
External User
Posts: 1
|
LAN-to-Web traffic uses customer's VPN connection
Hi,
I service & monitor customer systems using the Windows VPN client in a LAN-to-LAN situation. When the VPN connection is established and I start IE it accesses the web through the customer VPN connection instead of my own LAN to internet connection. IE is set to Never Dial a Connection. I want all traffic initialy follow my local LAN-to-internet route. Only when the IP-address matches the VPN range, traffic should go there. I checked My Network Locations / Properties / Advanced / Advanced Settings but there is no option to give local Lan-to-Web connections precedence over VPN connections. How to solve this problem? TIA, John7 |
|
|
|
|
2
1st November 02:55
External User
Posts: 1
|
LAN-to-Web traffic uses customer's VPN connection
Sounds like routing issue. Posting the result of ipconfig /all on both
client and VPN server may help. -- Bob Lin, Microsoft-MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com |
|
|
|
3
1st November 02:55
External User
Posts: 1
|
SOLVED: LAN-to-Web traffic uses customer's VPN connection
I had to disable 'Use default gateway on remote network' in the Advanced
VPN-connection IP-properties. John7 "Bob Lin (MS-MVP)" <noreply@chicagotech.net> schreef in bericht news:86702534-6400-4D66-9814-6DDFAD240196@microsoft.com... |
|
|
|
4
1st November 02:55
External User
Posts: 1
|
SOLVED: LAN-to-Web traffic uses customer's VPN connection
Thank you for the update.
-- Bob Lin, Microsoft-MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com |
|
|
Linear Mode
