Visite Webhosting Latino, el site sobre alojamiento web.
Ideas on affixing a powerboard inside my rack case ? (m may them) - Mombu the Music Forum
Mombu the Music Forum sponsored links

Go Back   Mombu the Music Forum > Music > Ideas on affixing a powerboard inside my rack case ? (m may them)
User Name
Password
REGISTER NOW! Mark Forums Read

sponsored links


Reply
 
1 15th June 09:39
incubus
External User
 
Posts: 1
Default Ideas on affixing a powerboard inside my rack case ? (m may them)


I'm needing to somehow affix a 4 way powerboard and a transformer (it's a
big black Alesis tranformer for the Quadraverb GT with 240 volt cord out
of one end and the din connector which goes into the Quadraverb out of
the other end) to the inside of my wooden rack case.

It's a pretty standard rack case with the black carpet on it.

In the past, I've taken some aluminium and bent it to fit around these
thing and then screwed them down directly into the wood.

I'm just wondering what other methods may be out there.

Any help much appreciated.
  Reply With Quote


  sponsored links


2 15th June 09:40
sam lloyd
External User
 
Posts: 1
Default Ideas on affixing a powerboard inside my rack case ? (cable)


Those Alesis PSs are fairly hefty, but a big enough piece of velcro
would do it. You could also use cable restraints (like the kind that
hold the AC cord to the inside of an amp cabinet) on the cords to even
further secure it.

Sam
  Reply With Quote
3 15th June 09:40
incubus
External User
 
Posts: 1
Default Ideas on affixing a powerboard inside my rack case ?


Actually, when I bought the Quadreaverb, it was second hand and it had a
huge peice of velcro stuck to the bottom of it (the rack unit, not the
power supply), which I removed, but you're right.....a big ass piece of
velcro would hold any piece which needed to be secured.......

Even multiple strips of velcro I guess.......

Thanks for the response dude.
  Reply With Quote
4 15th June 09:41
onenospam4rich
External User
 
Posts: 1
Default Ideas on affixing a powerboard inside my rack case ?


A 4-way powerboard? Do you mean a power supply? I used to use a 6-outlet
power strip with a circuit breaker in it for my rack...it had holes on
the bottom to attach to screws. I put two screws the bottom of the rack,
and mounted the strip securely. I use a Juice Goose rack mounted power
supply these days, I guess I wanted it to be more professional.


I have the QuadraVerb's transformer secured with two large pieces of
velcro, and it's never budged.

~Rich
See my gear at the link!
http://community.webtv.net/one4rich/RichsGuitarPage
  Reply With Quote
Reply


Thread Tools
Display Modes




Copyright 2006 SmartyDevil.com - Dies Mies Jeschet Boenedoesef Douvema Enitemaus -
666