tbcode

Hi,

I have got a strange problem with my fresh installed netbsd box.
I've got a K7S41 mini-ATX mainboard full of Sis controller.
I plugged the hard drive alone on the first IDE controller, in master
mode.
I plugged the DVD-RW drive alone on the second IDE controller, in
master mode too.

The DVD-RW is never detected on the pciide? bus.
I tried to put it in cable select mode but with no success.

I plugged it in slave mode on the same IDE controller as the hard
drive, then everything works, means, it is detected and I can use it.

Isn't it possible to have a hard disk on the first controller and an
ATAPI drive on the second one with NetBSD ?

thx in advance for your answers.

case
--

fredb

In article <e3767a2e.0409191139.40dc57b6@posting.google.com>,
tbcode@yahoo.com (case) writes:

Is it on a cable select cable? The cable that comes with the drive
usually isn't. It should have worked in master mode, regardless.

Is the second controller enabled in the CMOS? detected? Post the
output of some command such as "dmesg | egrep 'ata|cd|ide[01]'" to
display the relevant information.

In general, yes, but a few CD-ROM drives won't work as masters on
any OS. You wouldn't expect that to be a problem with a new DVD-RW.
What make and model of drive is it?

--
Frederick

tbcode

I just tried in cable select. But the DVD-RW is definitly on the
second IDE controller, alone and in master mode.


I confirm that the second controller is enable in the
CMOS/BIOS/whatever. I can even boot from it.

here comes what dmesg tells me:

NetBSD 1.6.2 (PUNK) #6: Mon Sep 20 03:49:18 CEST 2004
root@punk:/usr/src/sys/arch/i386/compile/PUNK
cpu0: AMD K7 (Athlon) (686-class), 1818.03 MHz
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 256 KB 64b/line 16-way
cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SE P,MTRR>
cpu0: features 383fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 383fbff<FXSR,SSE>
total memory = 191 MB
avail memory = 174 MB
using 2477 buffers containing 9908 KB of memory
BIOS32 rev. 0 found at 0xfdb10
mainbus0 (root)
pnpbios0 at mainbus0: nodes 14, max len 138
joy0 at pnpbios0 index 12 (PNPB02F)
joy0: io 200-207
joy0: joystick not connected
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Silicon Integrated System product 0x0741 (rev. 0x03)
agp0 at pchb0: aperture at 0xd0000000, size 0x1000000
ppb0 at pci0 dev 1 function 0: Silicon Integrated System product
0x0003 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: Silicon Integrated System product
0x6330 (rev. 0x00)
pci_mem_find: void region
pci_mem_find: void region
pci_mem_find: void region
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0
pcib0: Silicon Integrated System 85C503 or 5597/5598 ISA bridge (rev.
0x25)

pciide0 at pci0 dev 2 function 5: Silicon Integrated System 5597/5598
IDE controller (rev. 0x00)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <HDS722516VLAT80>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 153 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 321672960
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
(Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data
transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)

Silicon Integrated System product 0x7012 (audio multimedia, revision
0xa0) at pci0 dev 2 function 7 not configured
ohci0 at pci0 dev 3 function 0: Silicon Integrated System 5597/5598
USB host controller (rev. 0x0f)
ohci0: interrupting at irq 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 3 function 1: Silicon Integrated System 5597/5598
USB host controller (rev. 0x0f)
ohci1: interrupting at irq 10
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
Silicon Integrated System product 0x7002 (USB serial bus, interface
0x20) at pci0 dev 3 function 2 not configured
sip0 at pci0 dev 4 function 0: SiS 900 10/100 Ethernet, rev 0x90
sip0: interrupting at irq 10
sip0: Ethernet address XX:XX:XX:XX:XX:XX
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
biomask ff6d netmask ff6d ttymask ffef
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

The brand of my DVD-RW is EMPREX, EMPREX DVD Dual Internal DVD-R/+R
-RW/+RW

thanx in advance.

case