ravage

Hi,

Since there isn't any sort of place to register bugs and such I thought
I'd pass it along.

snoopy will throw 'read exceptions' during a pull on a P2 133MHz with 128M
of RAM. The pull seems to go fine but snoopy seems to have a problem after
about 2-3 minutes of operation.

I've run snoopy on this exact same machine for days on end withou a hitch
on several previous occassions.


--
__________________________________________________ __________________

We are all interested in the future for that is where you and I
are going to spend the rest of our lives.

Criswell, "Plan 9 from Outer Space"

ravage@ssz.com jchoate@open-forge.org
http://www.ssz.com http://www.open-forge.org
--------------------------------------------------------------------

cross

9trouble@plan9.bell-labs.com

- Dan C.

plan9

where you get this P2 133MHz?

kyxap

presotto

For future reference, people can mail to 9trouble@plan9.bell-labs.com.

I'll check it out. I'm assuming an ethernet connection?

ravage

Thanks. I'll be adding a second one since the pull I started this AM
failed at some point during the day. It failed just after
sys/src9/ppc/ucu.h with an error about bin/fscmd directory entry not
found. Then a line about /n/kfs/disk/replica/client/_plan9.db: rc(pull):
can't open: access permission denied.
<shrug>

Onward through the fog.


--
__________________________________________________ __________________

We are all interested in the future for that is where you and I
are going to spend the rest of our lives.

Criswell, "Plan 9 from Outer Space"

ravage@ssz.com jchoate@open-forge.org
http://www.ssz.com http://www.open-forge.org
--------------------------------------------------------------------