Mombu the Programming Forum sponsored links

Go Back   Mombu the Programming Forum > Programming > Which tcp port does IngresNet use on HPUX
User Name
Password
REGISTER NOW! Mark Forums Read

sponsored links


Reply
 
1 25th February 08:42
norman woo
External User
 
Posts: 1
Default Which tcp port does Ingres/Net use on HPUX


Hi folks

We have Ingres/Net running on a development server (HPUX 10.20) and we
need to access a production database running on a production server
(also HPUX 10.20) via ISQL. However, the production server is behind
a firewall and we need to advise the security folks which port on the
production server we need to have open so that Ingres/Net on our
development server can access the production server. Which port(s)
should we use and/or where should lwe ook to determine the port?

TIA
  Reply With Quote


  sponsored links


2 25th February 08:42
peter gale
External User
 
Posts: 1
Default Which tcp port does Ingres/Net use on HPUX


Hi Norman,

The choice of ports is entirely up to you. Typically Ingres/Net is
configured on the server to use the Installation ID as the listen address.
This translates to a tcp-ip port when the net server starts up and will
always translate to the same value. You can find out what it translates to
by looking in $II_SYSTEM/ingres/files/errlog.log on the server just after
the net server has started. You will see an entry like this.

Sun Jul 10 07:31:16 2005 E_GC2815_NTWK_OPEN Network open complete for
protocol TCP_IP, port II (21064).

So the port ID is 21064.

If the server is configured to start multiple net servers from the same
configuration then there will be one line for each.

Sun Jul 10 07:31:16 2005 E_GC2815_NTWK_OPEN Network open complete for
protocol TCP_IP, port II1 (21065).

Sun Jul 10 07:31:16 2005 E_GC2815_NTWK_OPEN Network open complete for
protocol TCP_IP, port II2 (21066).

And so on up to a maximum II7 (21071). If there are multiple net server
configurations then you could find more than 8 ports.

As I said these port ID's will be the same every time these net servers
start up.

All the best

Peter Gale
Comprehensive Solutions (US)
Comprehensive Solutions International (UK)
T: +44 (0)1398 341777 M: +44 (0)7831 513181
PGale@Comp-Soln.co.uk http://www.Comp-Soln.co.uk

-----Original Message-----
From: info-ingres-admin@cariboulake.com
[mailto:info-ingres-admin@cariboulake.com] On Behalf Of Norman Woo
Sent: 28 September 2005 01:52
To: info-ingres@cariboulake.com
Subject: [Info-ingres] Which tcp port does Ingres/Net use on HPUX

Hi folks

We have Ingres/Net running on a development server (HPUX 10.20) and we
need to access a production database running on a production server
(also HPUX 10.20) via ISQL. However, the production server is behind
a firewall and we need to advise the security folks which port on the
production server we need to have open so that Ingres/Net on our
development server can access the production server. Which port(s)
should we use and/or where should lwe ook to determine the port?

TIA
_______________________________________________
Info-ingres mailing list
Info-ingres@cariboulake.com
http://mailman.cariboulake.com/mailman/listinfo.py/info-ingres
  Reply With Quote
3 25th February 08:42
franky.leeuwerck@gmail.com
External User
 
Posts: 1
Default Which tcp port does Ingres/Net use on HPUX


Thanks for this tip, Peter.

Franky
  Reply With Quote


  sponsored links


Reply


Thread Tools
Display Modes




Copyright 2006 SmartyDevil.com - Dies Mies Jeschet Boenedoesef Douvema Enitemaus -
666